Pros and Cons of String Inverters vs Microinverters

  Solar inverters have one core function: convert the direct current (DC) solar panels generate into an alternating current (AC), which is the type of electricity used in your home.

 

Inverter technology has been steadily evolving over the past several decades to better enable homeowners to reap maximum power from their PV systems. Both string inverters and microinverters do this job for you as a solar homeowner, but go about the process in different ways.

 

Let’s take a closer look at what string inverters and microinverters are, and how they stack up against each other for use in your solar energy system.

 

On this page

1. What is a string inverter?

1.1 Advantages of string inverters

1.2 Disadvantages of string inverters

2. What is a microinverter?

2.1 Advantages of microinverters

2.2 Disadvantages of microinverters

3. Microinverters vs. string inverters: which is best?

 

What is a string inverter?

 

A string inverter is a standalone box that is typically installed close to your main service panel and electricity meter.

 

There is typically only one single inverter, or possibly two string inverters on each residential solar installation; it really depends on the overall solar power system size.

 

A string inverter functions in a series circuit, with there usually being 6 to 12 individual solar panels in what is known as a “series string.”

 

Advantages of string inverters

 

Easy to troubleshoot

The main advantage of a string inverter is that you only need one of them to convert the DC electricity coming from your solar array to AC power. If anything is going to fail in a solar system, it is likely to be the inverter – making troubleshooting relatively easy when things go wrong.

 

Cost

Installing a single string inverter on a solar panel installation is cheaper than installing microinverters. Less labor hours are required, and string inverters are more affordable than many microinverters.

 

Lower probability of wiring mishap

There are less connections between solar panels and the string inverter. Therefore, there’s a reduced chance that a string inverter setup will be improperly cabled, compared to a microinverter system.

 

Disdvantages of string inverters

 

Efficiency in partial shade

Since string inverters require solar panels to be wired in series, if one solar panel’s output is affected, the entire series of solar panels is affected in equal measure. This can pose a major issue if some part of a solar panel series will be shaded for part of the day.

 

More difficult system expansion

To get optimal performance from a string inverter, it needs to be working near its peak capacity. So, if you want to increase the size of your solar array at some point down the road, those panels will need to be routed to a separate string inverter, adding in additional complexity and cost.

 

Shorter lifespan

String inverters are warrantied to last between 8 and 12 years, whereas microinverters have a 25-year warranty.

 

System monitoring

Panel-level insight is not possible with a string inverter system, since there are no components affixed to the back of each panel to do the job.

 

While aggregate solar production is viewable, you won’t be able to see if there are individual panel performance problems which could be caused by a crack, defects, or debris.

What is a microinverter?

 

Microinverters perform the same basic function as string inverters, except they are installed underneath each solar panel on your roof. Each of these microinverters is about the size of an internet router.

 

The big difference between microinverters and string inverters is that a solar panel installation with microinverters will typically have the same number of microinverters as there are solar panels (Note: there are microinverters that accept two or four solar panels).

 

While standard string inverters will cap the electricity production of each panel by the lowest producing panel on your roof, microinverters don’t have this problem, since they function in a parallel circuit.

 

A microinverter will take full advantage of the production of each individual panel. It will convert the power generated by each panel to the grid voltage. Each solar panel and microinverter combination can “do their best” and contribute as much power as they can.

 

Advantages of microinverters

 

Rapid shutdown capability

New electrical codes require rapid solar system shutdown so first responders or firefighters are safe from high voltage when they need to be on rooftops or servicing power lines. Microinverters comply with these rapid shutdown requirements and have this capability embedded into each module.

 

More electricity

The core advantage of using microinverters is that theoretically, you can yield more solar electricity. The reason for this is that there are slight differences in currents between solar panels. When solar panels are in a string, the current is reduced to that of the least-producing panel in the string.

 

Suitability for challenging installation conditions

If a solar system is facing multiple angles, meaning some panels are facing south, some east, and some west, then microinverters are the way to go. Or, if you have shading issues from trees or a large chimney, again microinverters would be best.

 

In these situations, the solar panels will be producing different amounts of electricity at different times of the day, but microinverters will ensure you harvest all of the energy, while with a standard inverter you will lose some of this production.

 

 

Lifespan

Microinverters typically have 25-year warranties while standard inverters typically have 8 to 12 year warranties. The reliability of microinverters was in question several years ago, but the technology now has caught up with the industry and the long warranties on microinverters show the confidence the manufacturers have in their products.

 

Panel-level monitoring

Microinverters have the ability to track the production of each individual panel, while with a standard inverter you only can track the production of the whole system.

 

System expansion ease

If you were to expand your system in the future, microinverters are simple to add one at a time. Each panel and microinverter pair can be easily added to your existing solar array without needing to worry about purchasing, siting, and installing additional string inverters.

 

To sum it all up, microinverters are definitely a value-add, but are only recommended if you need to comply with rapid shutdown requirements, have panels facing multiple orientations or you have shading issues. Otherwise, the less-expensive standard inverter is usually more cost-effective.

 

Disadvantages of microinverters

 

Cost

The main disadvantage of microinverters is the price. They are typically $1,000 or so more expensive than a string inverter on a standard 5kW residential solar installation.

 

Maintenance

If one of your microinverters were to fail, not only would detecting which one has failed be a challenge, but once you did, servicing and replacing the component is not as easy as plopping in a new string inverter on the side of your house.

 

Your solar installer would need to again get up on your roof, work with your racking system, unbolt the solar modules, and replace the microinverter to re-establish AC conversion capability.

 

Amount of hardware on your roof

Since there’s a microinverter attached to every solar panel on your roof, that’s a lot of expensive metal equipment up there.

 

Microinverters may act as miniature lightning rods. If you’re in a storm-prone area, and have a historical wooden structure with shake roofing materials, you might want to think twice before installing them.

Microinverters vs. string inverters: which is best for your home?

 

Most microinverter manufacturers claim very low failure rates but at SolarReviews we remain skeptical of these claims.

 

The most complex electronic device in a solar system is the inverter, and based on my decades-plus experience in the solar installations business, the most common thing to fail in a solar setup is the inverter. I would be very reluctant to put 20 inverters up on a job rather than putting one string inverter. I would only do this where there were severe shading issues.

 

Although microinverter manufacturers sell the ability to monitor each panel as a benefit (and it is), they don’t include the monitoring that allows the customer to do this. They only allow the installer to see the panel-level data from your system and not you as a customer, unless you agree to buy the higher level of monitoring as an upgrade.

 

This means you as a customer only see system-wide monitoring information, not what is going on with each panel. A skeptic would say that the reason they do this is to protect them and their installers from support calls related to broken inverters. It is very difficult with only system-wide monitoring data to determine if only 1 or 2 inverters out of 25 or so have failed.

 

Having said this, I still like microinverters -but if I were a client purchasing a system with one, I would pay the extra money for the level of monitoring that gives you panel-level analysis. At least when a string inverter fails the whole system stops and this is easy to notice.

 

My gut feeling is that there are a lot of failed microinverters out on rooftops where the client does not even know they have failed.

Key takeaways

 

ㆍInverters convert DC electricity to AC electricity, which your home appliances use.

String inverters are standalone boxes ideally suited to unshaded solar panel arrays on roofs with uniform pitch.

ㆍMicroinverters are affixed to the back of every solar panel and maximize the output of each solar panel independent of the production of any neighboring panel, making them smart to use on partially-shaded solar installations.

ㆍString inverters do not have native rapid shutoff capabilities, whereas microinverters do.

ㆍString inverters, while more affordable, do not have panel-level monitoring capabilities and come with a shorter lifespan of 8 to 12 years.

 

We are a residential inverter supplier. If you are interested in our products, please contact us now!